Luckily, there are a few things that you can do to fix uneven knobs on cabinets. The first thing you need to do is replace any hardware that is worn out. After replacing the hardware, you must ensure that all the knobs on the drawers are evenly spaced. You can do this by putting the hardware in the drawers and then centering them vertically. You may also need to make holes for the knobs in the drawers.

Replace Old Hardware

Changing cabinet knobs and handles are a great way to give your kitchen a fresh look. There are many options for kitchen hardware available online at websites like, including vintage, contemporary, and unusual. However, before you begin, ensure you have a good idea of where to place the hardware.

The best way to find the right spot for your hardware is to measure the height and width of each piece. This measurement is called the Center-to-Center (CC), which will tell you if you need to drill new holes or if you can use a reusable adhesive.

The Center-to-Center measurement will also tell you how far the mounting holes should be from each other. This is an important measurement to take because it is a good indication of where to drill holes.

Center Drawer Hardware Vertically.

Whether you want to create a classic built-in cupboard or a new cabinet, you’ll need to decide where to put your cabinet knobs and handles. The proper placement of cabinet hardware will ensure your drawers function correctly and look good at the same time. You can choose styles, finishes, and designs to fit your needs.

Fix Uneven Knobs in Cabinets

If you’re installing cabinet knobs, you’ll want to choose a style that will suit your cabinet’s style and function. You can install knobs on the door, in the drawer, or on a drawer panel. These knobs can be either square or round.

You will also need to determine where to put your knobs in choosing a style and finish. You’ll want to choose a position that will make them easier to reach. It’s a good idea to walk around the room to see where you can put your hardware.

Make Holes Oblong in Both Locations.

Having knobs that aren’t in sync can drive you nuts. Thankfully, there are a few easy ways to fix uneven knobs in cabinets. The best one is to get the proper template for the task. You will need to measure the appropriate diameter for the hole holding the knob. Then, get an awl (yes, an awl) that you can use for the task. A good one will last you ten years or more.

You will also need a piece of cardboard or a poster board. These can be found at any home improvement store. The cardboard should be large enough to fit the hole. Also, mark the right corners of the door.

Fill a Drawer Knob Hole.

Adding hardware to your cabinets can be inexpensive to update your space. Knobs and drawer pulls are available in various designs, from cylinder knobs to geometric designs. Purchasing hardware is easy, and you can find a wide selection at your local hardware store.

Before installing new hardware, it is essential to measure and double-check the placement of your hardware. This is a safety measure and ensures that you get the proper spacing between the knobs and pulls. If your knobs don’t fit right, you may need to drill extra holes or adjust the furniture hardware to fit correctly.

If you are using new knobs, be sure to remove the old knobs and handles before adding the new ones. It is also important to note that different types of cabinet hardware are designed for different purposes, and you will need to choose the best hardware suited for your cabinet.